Results 1 to 6 of 6

Thread: Head and valves question

  1. #1

    Array
    Status
    Offline
    Join Date
    06-17-2012
    Posts
    158
    Location

    Tucson, Az
    Vehicle

    1987 Dodge D-50
    Engine

    G54B

    Head and valves question

    When i have the camshaft lined up with its timing mark is #2 exhaust valve and #3 intake valve suppose to be open? I am thinking that would be a big no so which leads me to next question y?

  2. #2

    Array
    Status
    Offline
    Join Date
    06-17-2012
    Posts
    158
    Location

    Tucson, Az
    Vehicle

    1987 Dodge D-50
    Engine

    G54B
    And I could be wrong

  3. #3

    Array
    Status
    Offline
    Join Date
    06-17-2012
    Posts
    158
    Location

    Tucson, Az
    Vehicle

    1987 Dodge D-50
    Engine

    G54B
    BTW g63b 2.0

  4. #4



    Array
    Status
    Offline
    Join Date
    03-16-2011
    Posts
    3,614
    Location

    Sacramento, CA
    Vehicle

    1979 Dodge D-50
    Engine

    Chevy V6
    If the marks are correct then it's correct. (Rule of thumb) You should always turn the crank over by hand 2 full revolutions after doing any cam timing or valve adjustment work. It ensures you that things are correct and don't hit. Starters will bend things if somthing hits.
    Members come and members go, But the board keeps track of them.
    Check out the Fear Monger by
    clicking HERE.

    The MightyRam50 site is sponsored in part by On Site Concrete Inc.

  5. #5

    Array
    Status
    Offline
    Join Date
    06-17-2012
    Posts
    158
    Location

    Tucson, Az
    Vehicle

    1987 Dodge D-50
    Engine

    G54B
    Just making sure before i put motor back together> I just bought the truck a couple weeks ago and i tore motor apart day 1 for rebuild

  6. #6



    Array
    Status
    Offline
    Join Date
    03-16-2011
    Posts
    3,614
    Location

    Sacramento, CA
    Vehicle

    1979 Dodge D-50
    Engine

    Chevy V6
    Did you dig through our manual section for your engine. We should have it in there somewhere.
    Members come and members go, But the board keeps track of them.
    Check out the Fear Monger by
    clicking HERE.

    The MightyRam50 site is sponsored in part by On Site Concrete Inc.

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •