Dropping ram50?

[Ram50808]

How many coils do I cut in order to get my front and back as level as possible.up front I got 2inch drop spindles,in the back removed middle leaf,and 4inch angle blocks.I just want my truck to b level as possible

[crvtec90]

http://www.mightyram50.net/vbulletin...ering-Question

My truck has 2 inch drop spindles with stock coils. rear is 3 inch blocks. It sits level when I load stuff in the bed......otherwise not very level

[DroppedMitsu]

Edit: scratch that forgot the rear is 2" higher stock so you only need 2" more drop in the front. So that would be about 1 coil cut off.

[pennyman1]

And cut the stop in half or you won't see a change one it is sitting on the stop