Results 1 to 7 of 7

Thread: NEED WIRING HELP! coil/balist

  1. #1

    Array
    Status
    Offline
    Join Date
    03-27-2012
    Posts
    120
    Location

    Bonney Lake, WA
    Vehicle

    1984 Dodge Power Ram 50
    Engine

    Please Select Your Engine Type

    NEED WIRING HELP! coil/balist

    I am trying to check my wires in my 84 ram 50 with the 2.6L with the stock coil and balist. I need someone to post a picture of what wires go to what from the battery, to the coil, the distributor to the coil and the balist, and so on. Basically what I am trying to ask is who has a stock ignition set up that wants to show me the color of the wires go where. Thanks guys.

  2. #2



    Array
    Status
    Offline
    Join Date
    03-16-2011
    Posts
    3,615
    Location

    Sacramento, CA
    Vehicle

    1979 Dodge D-50
    Engine

    Chevy V6
    Have you looked in the manual section? I know there is electrical in the first gen manual and some other ones.
    Members come and members go, But the board keeps track of them.
    Check out the Fear Monger by
    clicking HERE.

    The MightyRam50 site is sponsored in part by On Site Concrete Inc.

  3. #3

    Array
    Status
    Offline
    Join Date
    03-27-2012
    Posts
    120
    Location

    Bonney Lake, WA
    Vehicle

    1984 Dodge Power Ram 50
    Engine

    Please Select Your Engine Type
    not one diagram shows the ignition coil. and the one that mentions it doesn't tell me what color wires

  4. #4

    Array
    Status
    Offline
    Join Date
    04-07-2011
    Posts
    289
    Location

    Burbank, CA
    Vehicle

    1983 Mitsubishi Mighty Max
    Engine

    4D55-T
    Are you trying to re-wire the engine compartment? Sounds like your harness was hacked up??

  5. #5

    Array
    Status
    Offline
    Join Date
    04-07-2011
    Posts
    289
    Location

    Burbank, CA
    Vehicle

    1983 Mitsubishi Mighty Max
    Engine

    4D55-T
    I'll look at my factory manual and see what it has

  6. #6

    Array
    Status
    Offline
    Join Date
    03-27-2012
    Posts
    120
    Location

    Bonney Lake, WA
    Vehicle

    1984 Dodge Power Ram 50
    Engine

    Please Select Your Engine Type
    no not rewiring, i just disconnected all the wires on the balist resistor and my ignition coil and now I can't figure out what wire goes where.

  7. #7


    Array
    Status
    Offline
    Join Date
    08-31-2011
    Posts
    788
    Location

    Calgary, Alberta, Canada
    Vehicle

    1981 Dodge D-50
    Engine

    Ford V8
    On the factory manual that Camoit has posted on the site under "wiring diagram" it lists a single white wire to the negative and a double black with white stripe to the positive.

    The resistor goes to the positive side of the coil.

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •