Results 1 to 6 of 6

Thread: timing problems

  1. #1

    Array
    Status
    Offline
    Join Date
    02-22-2012
    Posts
    24
    Location

    inman sc
    Vehicle

    1993 Mitsubishi Mighty Max
    Engine

    Please Select Your Engine Type

    timing problems

    Well I cleaned up my mess from the mishap of leaving a ratchet on tge crankshaft bolt and had it running last night but it didn't seem like it was exactly right so i re read the book on setting the timing and originally I put a paper clip in the little plug on the wheel well when i set the timing. After reading again it said it should be grounded ....so i did that and checked timing again and it won't even run at all now. Everything seems dead on but my fear is maybe that wasn't the correct plug to ground...

  2. #2



    Array
    Status
    Offline
    Join Date
    03-16-2011
    Posts
    3,803
    Location

    Sacramento, CA
    Vehicle

    1979 Dodge D-50
    Engine

    Chevy V6
    Check the fuses. I remember seeing a post from LSR-Mike that he had a picture of the plug to ground out.
    Members come and members go, But the board keeps track of them.
    Find me on FaceBook
    clicking HERE.

    Or look on YouTube Click Here.
    http://mobilemillwright.com

  3. #3

    Array
    Status
    Offline
    Join Date
    02-22-2012
    Posts
    24
    Location

    inman sc
    Vehicle

    1993 Mitsubishi Mighty Max
    Engine

    Please Select Your Engine Type
    I checked all fuses under the dash and the one fuseable link i found. I double and triple checked base timing and it will not fire off. I checked voltage at the coil with the key turned on and have voltage there im getting fuel can the base timing not be set w/o that ignition jumped out and grounded? It was running prior to this but i didn't jump that out so I wanted to get it closer with a light and that circut jumped. Sorry guys I'm just lost at this point

  4. #4

    Array
    Status
    Offline
    Join Date
    02-22-2012
    Posts
    24
    Location

    inman sc
    Vehicle

    1993 Mitsubishi Mighty Max
    Engine

    Please Select Your Engine Type
    I spoke to soon cam I was looking over the wiring diagram and missed the three big inline fuses and found the 20amp popped so im going to pray thats my problem!fingers crossed!

  5. #5


    Array
    Status
    Offline
    Join Date
    04-04-2011
    Posts
    712
    Location

    Columbus, OH
    Vehicle

    1992 Mitsubishi Mighty Max
    Engine

    Other
    for those who missed it.


  6. #6

    Array
    Status
    Offline
    Join Date
    02-22-2012
    Posts
    24
    Location

    inman sc
    Vehicle

    1993 Mitsubishi Mighty Max
    Engine

    Please Select Your Engine Type
    Thanks mike! I wish some of the pros lived in SC! Lol

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •