bucket seats

[MaxinOut]

what kind of bucket seats would just bolt up to my existing bench seat holes 91 MM

[Sergio T]

The only ones I've ever known to bolt right on are Dodge D50 bucket seats...if you can find them.

[jbrockman]

I have a 90 MM extended cab and the late 90's-early 2000 Nissan Altima seats bolted up perfectly on the outside holes and I was able to weld some square tube the the Nissan rails and the inside rail bolted up. Maybe a maximum of an hour of work per side.

My Dad put Eclipse seats in without much work.

[Payrion]

jbrockman...snap a pic of the seats in your ride will ya?

[Sergio T]

I have a 90 MM extended cab and the late 90's-early 2000 Nissan Altima seats bolted up perfectly on the outside holes and I was able to weld some square tube the the Nissan rails and the inside rail bolted up. Maybe a maximum of an hour of work per side.

My Dad put Eclipse seats in without much work.

Pics pics pics pics pics!!!

[crvtec90]

I used a pair of starion / conquest buckets. They don't come close to bolting right in. No matter though since im so short that they wouldn't sit up high enough anyway. I used some 2 inch square tubing welded to the floor to bolt it down and raise it up.

[MaxinOut]

ah im about 6'6 -.- and sadly also i dont have a welder at my house ill have to see if i can borrow one or go to my aunts shop and use hers

[Sergio T]

Does anyone know if the Chevy S10 60/40 Buckets Seat would fit? I'm not too worried about a direct bolt on, more worried if I can shut the doors or not.

[DroppedMitsu]

I believe it was too wide when I measured my cousin's sonoma a while back, i could be mistaken on that though.

[Sergio T]

I believe it was too wide when I measured my cousin's sonoma a while back, i could be mistaken on that though.

I was afraid of that. I guess I'm going to have to come up with something else.