Results 1 to 5 of 5

Thread: Need a measurment if anyone can help.

  1. #1


    Array
    Status
    Offline
    Join Date
    04-02-2011
    Posts
    195
    Location

    Chesterton, IN
    Vehicle

    1991 Mitsubishi Mighty Max
    Engine

    4G64

    Need a measurment if anyone can help.

    im starting the rear of the truck, got the bed off and took measurments...my rear axle is 1 inch off on the pass side from the driver side.... I measured from the rear of the frame to center of axle, from rear cab mount to center of axle, from cab rear to center, all are 1 inch exactly different....not sure which one to use???? anyone have any info on the frame specs? or if anyone can putt a rear frame to axle measurment...

  2. #2



    Array
    Status
    Offline
    Join Date
    03-16-2011
    Posts
    3,513
    Location

    Sacramento, CA
    Vehicle

    1979 Dodge D-50
    Engine

    Chevy V6
    Manual section. first gen. full frame and body measurements. I don't think they got any longer over the years. 112 inch wheelbase.
    If you can use a frame hole near the front. Measure in an X pattern.
    Members come and members go, But the board keeps track of them.
    Check out the Fear Monger by
    clicking HERE.

    The MightyRam50 site is sponsored in part by On Site Concrete Inc.

  3. #3


    Array
    Status
    Offline
    Join Date
    04-02-2011
    Posts
    195
    Location

    Chesterton, IN
    Vehicle

    1991 Mitsubishi Mighty Max
    Engine

    4G64
    105.1 wheel base. on 2nd gen....the frame is fine, the axle isnt right..no big deal i guess, ill just use the longer number since the axle will pull forward when laying low..

  4. #4

    Array
    Status
    Offline
    Join Date
    04-06-2011
    Posts
    443
    Location

    Jacksonville, FL
    Vehicle

    1990 Mitsubishi Mighty Max
    Engine

    G54B-T
    im thinking the one leaf spring is sagging and thats why the measurement is off 1 inch......just guessing though

  5. #5


    Array
    Status
    Offline
    Join Date
    04-02-2011
    Posts
    195
    Location

    Chesterton, IN
    Vehicle

    1991 Mitsubishi Mighty Max
    Engine

    4G64
    ya i dont have too many leafs in there..lol..i set it at the bigger number so when laid out it will pull forward some.

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •