-
Sounds like it has something keeping the float to high, or you need to turn in the idle mix screw just a tad. But then again your linkage may need adjustment. Look in the manual and source inf section. Look for the first gen factory manual. Grab the carb section. It will show you how to check the adjustments. It sounds like the guy turned the wrong screw. There was a thread we had running for a while on the adjustments for a carb. You will need to look around or use the search to find it. I don't remember what guy it was. The factory manuals are the best place to start. Once you get it back to factory we can go from there. is your choke electric or does it have the water lines and thermal wax?
Last edited by camoit; 03-23-2012 at 07:54 PM.
Members come and members go, But the board keeps track of them.
Find me on FaceBook clicking HERE.
Or look on YouTube Click Here.
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Reply With Quote
Bookmarks