You can find generic ones that will work. They just don't fit as nice, but you must use what you can get.
Printable View
thanks
Update time i have been slackin
Fuel pump went out on me last weekend so I replaced that then when I got done decided to reblack everything I didn't think to take pictures until halfway through the only thing I haven't reblacked is the grille
Attachment 6426
Got this out at pick and pull for 5 bucks (they are about 40 elsewhere) tap and dye set and its on (ill get the pic later)
Attachment 6427
Attachment 6428
Attachment 6429
Attachment 6430
Attachment 6431
Attachment 6432
Striped my tailgate and painted it with chalkboard paint. It looks a little funny currently but tomorrow I get to draw on it (i think it will help :thumbup:)
Attachment 6438
I started to strip the M and I stopped and took a picture before I got too far to show the before
Attachment 6439
She looks naked here
Attachment 6440
The rattle can paint I used
Attachment 6441
Taped and done
Attachment 6442
Final product minus the chalk drawings which I'll get to tomorrow
Im going to let people draw on it and if I like what they drew I'll shoot some clear coat over that area to save it
What an imagination, chalkboard painted tailgate. Your going to need a chalkboard eraser also.:grin:
I just wrote stuff on it real quick before I went driving around yesterday
So please do ignore the shitty quality of my chalking. Also the very first thing that got put on it was the MightyRam50.net
Attachment 6448
Attachment 6449
People have had fun with it went to a car show and put the chalk on the bed rail
Attachment 6467
Intresting idea.
lol Maxin, that shit is so dope.. and taillights look good, not even that dark. I blacked mine out completely w/ spray on tint. I guess it'll come off w/ acetone if it needs to. :grin:
Update time!!!
Not much since my last update I put a sub behind the seat I don't have pictures yet and an amp under the seat (I orginially put it on the cab wall but since moved it) and a gain knob (it looks factory) made an egr block off plate
Attachment 8429
Got another steering wheel have yet to get the adapter for it though (got it brand new in the box for 20 bucks)
Attachment 8430
And did the LED dash lights
Attachment 8431
Also I purchased another mighty max that was a 2.0 truck fixed it and sold it to a friend (immediately referred him to the board) i dont remember his name up here :shrug:
This was the two trucks together
Attachment 8432
Today the tentioner sized and scorched my timing belt (saved it before it broke) got another timing belt, tentioner, and waterpump so I can get the barb welded on the back and put it back together
If your are thinking rb drive-train. there is actually a Nissan hard-body that is running one in Chicago. He uses it for the drift scene. I am tempted to set my truck up for drift since I am in the process of throwing in a different 4g63t that I slapped together. I am working on the finishing touches and hope to start it in the next week or so. I think that this will be a great platform for a drift truck.
Im still in the debating stage of exactly what motor I want to do in it. Ive been toying around with the ideas of a 22re, ka24det, or even a ca18det
have you looked at the 4g option or are you thinking about doing a lot of work to drop in something that is not a mitsubishi. I have a 240 that I have to figure out what is going on with the Ka that is in it. I also have the 4g in the truck and when it was running I loved the power that it provided. with a different rear end I am sure i will be able to slide it great when I want to.
I want to do something different. Until I figure out exactly what and when, I want to do the 4g63 head swap (I would want to keep my block)
http://projectzerog.com/ this is a good site if you want to do that.
Been a while since I've updated. I'll have to get the app to post pictures but since I last posted I've done "proper" exhaust, after my second exhaust ticket, I found a set of 1st gen mr2 buckets that I threw in (still need to dye my passengers and the headrests) but semi-in the process of dying them. I also put my grant wheel on. And over last weekend I picked up some wheels. They were all chrome 5 spokes with dish, I just got inside from painting them. Planning on getting some tires for em tomorrow
I had an idea since I keep going through the rubber on my clutch pedal (and because I like the look o racing pedals) today I bought griptape and I'm going to take the rubbers off and put the griptape on and drill holes. Ill take pics, I've been slacking on pic posting. I know how pic hungry you guys are (I don't blame y'all though)
This Truck is still around just owned by me now and just sitting for the time being
I do but don't have where it is at once the garage up on my dad's property I should be able to find it and I will let you know