What is the real stroke on the truck G63B?

ok sooooo i see here on this site under the wiki pages that the truck motor G63B had a 85mm bore and 100MM stroke right?
http://www.mightyram50.net/vbulletin...k+Engine+Specs

but everywhere else i look it says the G63B is a 85mm bore and 88mm stoke. same as the 4G63.

so can anyone confirm if because our G63B was in a truck it got a 100mm stroke? or is this just one big typo....

The 85mm x 88mm dimensions are correct for the G63 designated engines (actual capacity of the G63 is 1.997 litres). If your truck has a 100mm stroke it works out to be about 2.27 litres (your truck is most likely running a 4G64 crank...)

then this sticky in the wiki info needs to be changed

Quote:

---

Originally Posted by thehive

then this sticky in the wiki info needs to be changed

---

Will check it out asap. These numbers were collected from reliable sources though we are all human and prone to mistakes. I know I make plenty of them here, just ask Pennyman. I personally will look into this and correct it.

Thank You for catching this, it is appreciated and we do not like to post information that is incorrect. :)