Carb popping and little rough Idling
Instead of writing out an entire story and trying to describe what is happening, I posted a video of the problem and hope can fix the issue I am having.
http://youtu.be/bgC24-f2E2w
The truck started acting up so I pulled it in to garage to do some long time needed maintenance. Just before, the truck began to sputter and pop out the carb and had some hard starting for a long time. The truck is babied more then the typical truck and I owned it since '87. I did a bunch of work with new Carter fuel pump, new holley fuel regulator, exhaust manifold, another distributor, new 100 amp alternator, new timing and balance shaft belts, rockers adjusted, another starter, added relays while also removing old wiring of installed accessories, driving lights, amp, put in a fuse terminal in engine bay. So, everything works fine and my minor electrical problems are cured. But, the engine sputter and carb popping is still going.
I did a compression test and readings are...#1=155, #2=145, #3=145, #4=155. Rocker adjustment seemed like normal with a few tight ones, but nothing out of ordinary.
Anyway, check the video if you like and if you notice something I haven't, chime in and we'll check it to be sure. I do need to recheck the timing belt replacement, though I have replaced them 3 times in the past, this last time the belts must of jumped prior to replacing and were out of their alignments. I realigned the sprockets before installing belts, but you never know when your tired and thought you did it all correct.
Thx
USE THIS LINK IF ABOVE DOESN"t WORK
http://youtu.be/bgC24-f2E2w
Video starts dark because timing light adjustment, the lights come on hang tight