This is for everyone looking for there broken wiper combo switch or just to have a spare .These are only $55.00 USD shipped brand new .
Fits 1987-1993 ram 50 and mighty max .
Go to the alliexpress website . Type in /search ram 50.
Here is the link http://m.aliexpress.com/item/32432541529.html
Mods . If this thread needs to be moved I apologize.
Thank you! i have been looking for one of these under 100 bucks. my high beem switch keeps flashing everyone every time I go over a bump lol.
Np ,
I figured it's a lot cheaper then paying 240.00 from the dealer . Or if you can't find one at the junk yards.
It's fine your a donator.Quote:
Originally Posted by maxdsm
Just ordered one so we'll see....for $55 figured it was worth the risk...aliexpress reviews were less than stellar.
Anyone aware of a link for one of these assemblies for the first generation truck? My turn signal broke a few winters back on a -20F morning and now I support the blinker with a piece of paper to keep the signal from constantly blinking.
Not certain it fits the first gen seeing the setup is diffrent I believe. Someone correct me here.I ordered one as well and have ordered from alliexpress before with no problems. I will try it out as well to see and make sure it works correctly I don't see why not.
Received a order shipped confirmation.
Looks like theres only 2 order...me and you maxdsm...LOL
Yep, same, but for some added reassurance I bought this as a spare because they do brake easy. Dealer wants 250.oo for one and I dont know how long this place will have them for this cheap.Unless you luck up and find one at a j-yard for cheap.
great find !!
almost pulled the trigger last night on one for close to $240
Np.....
have you received yours yet maxdsm?
I checked my tracking info just now and it looks like mine might be stateside so it shouldn't be long.
If by chance these end up being setup for RHD like it is shown in the pic (might just be upside down), let me know. My truck is still using the LHD switches and it bugs me lol.
Yea the pic is upside down .Got this in today .I'm going to hook it up tommorow and see if it works. I don't expect the intermittent wiper part to work seeing how the old one does not have this .Or maybe I just need to clean the wipers off or get a new wiper motor because the move very slow.
I believe I did see one on that site for RHD L200 or 300.
Here is the pic of the old wiper controls I have on my 88 max.Not much difference.
The old cluster in comparison.
http://www.ebay.com/ulk/itm/121500546483Quote:
Originally Posted by Merrill
Found it before. Thanks anyway, Noah. I'm just being lazy is all :lol:
I see savings as opportunity for other members to unload an error part, and me to save a few bucks.
just to let people know .Tested this today and everything works flawlessly.
including the intermittent wiper part?
I still havent received mine. It shows it being processed at USPS a couple different times but still waiting....
Yes , pennyman . It had the extra pin out on both ends of the harness.
Unc . Be patient it takes a while to go thru customs.
Is the wiper motor different or is it all in the switch assembly?
No wiper motor is the same . It's separate on the drivers side firewall under the hood.
The new control allows more settings for the wiper motor..Notice the more options on the wiper stalk.
Wife told me the switch arrived today...still working so I'll check it tonight when I get home.
I'll post good pics too.
Came wrapped up pretty good...overall pleased just based on appearances. Beats paying $200+ for a replacement.
http://i16.photobucket.com/albums/b9...stvvhjzzd.jpeg
I meant does the switch assembly make the wipers intermittent alone or do you need to switch out the motor ass too?
No switching out the motor is not needed it works intermittently by just plug and play .There is an extra set of pin outs on the new harness and old harness that take care of that part to make it function fully.
Awesome, I'm gonna have to buy one for sure then. Thanks for the help and the link
anyone else have a problem with them? they canceled my order twice already. they said i didnt make payment on time. but i paid for it with 2 different cards that i know for sure has money in it....wierd.
Np^ . Haven't had an issue you can contact the seller thru chat. I'm not sure why thay would tell you that?
maxdsm Thank you for the tip on the switch! I ordered one a little over 2 weeks ago and it arrived today. I didn’t install it but did plug it into the harness and checked all the functions (it took a couple of seconds to figure out how to how the plug unlocked (push in on the long sides of the plug to release). Everything works, including the wiper delay (my truck was not equipped with the delay function). I bought it as a spare. but when I get a chance I’ll probably go ahead and install it just to upgrade the wipers.
I used to build/modify older vehicles for a living and from experience know that past a certain age some parts can become almost impossible to find either new or good used. As I suspect that that time is rapidly approaching for these trucks I’ve been collecting spares when I can find them at a reasonable price. The $250+ that most places wanted for the switch was way more than I wanted to pay for a spare and figured at some point I might get lucky and find one at a wrecking yard…….you saved me a fair amount of aggravation.
About the only thing I’m still trying to find now is the hazard light switch….anybody have any leads?
These pretty prone to going out?
Yes they tend to brake.No leads on a hazard switch sorry.
Good stuff man. I have an extra switch but it doesn't have intermittent function. Now Im jealous
You all are welcome . I need a new wiper motor I think they move real slow mane just need cleaned idk? Are there any that are interchangeable ? Montero? Isuzu?
Finally installed mine...fitment is ok, nothing really to complain about for the money but mine was a tad bulkier all around and caused some issues with the steering column trim. Nothing that would keep me from buying again.
I ordered one and they cancelled my order for security reasons with my paymnet?? lol I'll try again in a few days
^^^
Any update on this DroppedMitsu ??
Curious as I want to order one for Whitey
Thx!
No, plan on ordering again tomorrow after I get off work. I'll use my debit instead of a credit card this time. How did you others pay for the purchase?
You might have to create an account first . Idk why they canceled your order you can contact the vendor thru chat.
Paid credit/debit.
yeah I don't think I created an account, tried to do it as guest I think idk.
So,
switch is ordered? (well it shows they have My money)...
We shall see, Hoping for the best, as it took 20 min to
complete the order !!! Christmas slow web I hope.:shakehead:
Maybe be aware of the Chinese holiday ? Not sure how they operate.
^^^
Another HUGE THX maxdsm !!!
Unit arrived today ---works as described--- WhooHoo !!!
LOL, I am a bit put out though, took Me 5 min to get through
the packaging !!!(kid at Christmas, yada, yada ).
I mean really, that package coulda been run over
by a truck & suffered no harm.
(sarcasm)
Mine didn't break yet but it the plastic at the switch base to stalk for the high beam cracked and chipped a small piece off. Any special headaches I might see placing the order?
I ordered one again on Saturday and my order went through this time, said they shipped it this morning. I used a debit card instead of credit card like I did last time.
Well, I finally got mine ordered, took two days of trying to figure out how their website works. :rolleyes: We'll see if it goes through.
ed; got the shipping comfirmation email today, so yay for me!
will is work on my 95???
It should but not 100% sure . Take a picture of the wiper stalk and I can tell you . Maybe someone else can give you a better answer .
I would assume it would. They never changed on the second gens as far as I know/have seen.
I also got mine last week, haven't installed it yet but it looks like a nice product. Maybe I'll try it this weekend
Update,
--- 01/09/2016---
Humble thanks added again maxdsm .
Np....claych . Glad this worked for you as well.
Received and installed, no problems.Quote:
Originally Posted by Lon Moer
One thing to note, though. The new wiper control stalk is longer and closer to the steering wheel than the original style.
I haven't hit mine yet, but I can bump it when I'm turning hard. Might have to get another spacer behind the steering wheel.
A new sports wheel with some dish to it will cure your ills :grin:Quote:
Originally Posted by Lon Moer
Yeah, the MOMO that I have is pretty flat.Quote:
Originally Posted by geezer101
I already had to add a spacer between the wheel and hub to clear the light switch column stalk.
I check the original post and the link no longer works. Is there somewhere I can still purchase this? Thanks
This is all I've been able to find so far (not a genuine part by the looks of it) specifies right hand drive only - http://www.ebay.ca/itm/For-1986-94-MITSUBISHI-MIGHTY-MAX-COLT-DODGE-RAM-50-INDICATOR-COMBINATION-SWITCH-/172529390566?hash=item282b8d93e6:g:KfYAAOSw2gxYoVJ W&vxp=mtr
It took a little digging around to find it again on aliexpress, here is the new link: http://www.aliexpress.com/item/COMB-...2-9930a7398e21Quote:
Originally Posted by Ricekidd
maxdsm can you put this link in your main post for easy access to the link.
There's another listing there for a little over $37. I ordered this one, I'll let you know how it works.
http://www.aliexpress.com/s/item/32816700237.html
My edited link didn't work. Try this.
https://m.aliexpress.com/s/item/3281...3d2c41caPU4Rn1
Update:
So, I ordered the switch on July 25th and received it on August 5th. Less than two weeks. If anyone needs one, I recommend my link above, it's about $34 and well worth it. I already installed it and it seems like really good quality. I have a 95, by the way.
That's a good find as well silverjoel. Doesn't have the intermittent wipers like the one I found. It's just an earlier model.
This probably won't work in a gen 1 d50/Mitsu unless you reseat the new wires in the old harness. I pulled one off a 91 mighty max in the jyard and it's got the new pin system and bladed fuses.
You need the column switch from a 1st gen sport or royal model with column mounted wiper controls - there are a couple on ebay right now still in trucks...
now the link to the switch is $14
Plus tax...
unstick this post---- link don't work
Individual AliExpress vendors and their links come and go, but AliExpress still has these combo stalk switches listed by other vendors there, so I think this thread is still valuable to keep stickied for that tip.Quote:
Originally Posted by KCKC Amy
Another tip: they seem easier to find by searching for the general export model name L200 (and related L300, aka the Delica minivan) -- e.g., by searching for "mitsubishi l200 combination" -- rather than more market-specific names like Triton, Forte, Strada, Mighty Max, Ram 50, etc.
Also pay attention to LHD vs RHD, as well as the wiper stalk settings to make sure they match your original switch; some have only 2 speeds, others add intermittent.