Local Sightings

I'd like to post reports here on local Ram 50 vehicles, and other members are encouraged to post their own local sightings. I have asked permission from the owners to photograph their vehicles, then conduct a short interview with them. I'm posting the thread here so they can see their Sighting...possibly sign on to the site...and each Ram 50 owner I interview is directed here to the website.
royster

Shelley's 1989 2.6 4x4

Though not an eye-catcher, this truck is her husband's baby. He prefers to work on it rather than any other vehicle, though a busy life hasn't allowed much fixing up: just keeping this daily driver running.
Attachment 10965 Attachment 10966

Having recently switched my rear window out, I gave Shelley the old one for her husband to install on Big Red. Shelley's only complaint about the truck is how hot it gets in the cab. Now they'll have redneck air conditioning!
Attachment 10967

There's a similar thread on www.sigma-galant.com where members post what they've seen and where. I wish I was able to post up a pic my wife took of a Mitsubishi Triton 4x4 last week with a sticker on the rear window proclaiming "DANCE LIKE YOUR VAGINAS ON FIRE"! I nearly caused an early morning pile up I was laughing so hard :rolling:

Adam is a young man who collects little trucks and unusual vehicles...I hope to do a report about his '59 Hillman and '59 right-side-driver Peugot.

But today is the 2.6 long-bed snow plow he acquired last year...a little too late for plowing snow, but winter happens, and I'm sure he'll have plenty of opportunity to use it in the future.
Attachment 10997 Attachment 10998 Attachment 10999

Adam showed me that the blade works quite well, and the controls are on the dash...very small but adequate. He is unsure of the truck's history, but remains confident it was originally sold locally in Woodstock.
Attachment 11000

The engine is tired at 230,000 miles, and Adam is in no hurry to do much with the truck: he has about 11 other vehicles demanding his time and attention. The interior is in good condition, and the original paint job is hanging on, but not indefinitely.

Thanks, Adam, for your time and permission to photograph your Ram 50. royster

^something a little out of the ordinary. Nice spotting Roy :)

what about the bulletside datsun truck next to his ram 50?

Quote:

---

Originally Posted by pennyman1

what about the bulletside datsun truck next to his ram 50?

---

He has THREE of those, and an older Datsun*, too. Adam could be whole thread, just with the vehicles he has. I'll be sure to visit him again and post a short article on his collection. I'll ask permission for several pictures: everyone on this forum will appreciate his story.

Attachment 11062

* the bed made into a trailer

The Datsun you're seeing in the above photo is slated for the crusher. I looked at it and the rust is so bad, paint is the only thing keeping it together.

I had a wonderful chat with Adam this afternoon, and he is happy to let me take photos and interview him on the various vehicles. He even consented to a possible video, which tempts me.

Among the features of upcoming articles will be his 1959 Peugeot 203, which not only LOOKS a lot like the one in this photo, it might well BE this one. According to Adam, there are only about 10 of these in the U.S.. He says Australians love these guys, so we'll see what Geezer101 has to say about it.
Attachment 11063

Drum roll please...nup, don't know anything about them. I have a feeling that Peugeot didn't have much of a foot hold in Australia during the 1950's, we were busy importing from the British and US markets and starting our our local motor vehicle manufacturing base. The car that sort of resembles the '59 Peugeot in the pic above would've been the Chevrolet designed GMH 48-215 (they are referred to as the 'FX' but weren't designated the model code officially) - http://en.wikipedia.org/wiki/Holden_48-215

THIS "local sighting" is right here on the forum, a member who has never posted but did add an album in the Gallery. Addone - a member in Missourri - has a really handsome '93 Mighty Max 4 x 4 3.0 6...I hope Addone posts more pictures: this is one beautiful truck. (Members are advised to see more at the Gallery http://www.mightyram50.net/vbulletin...hp?albumid=334

Attachment 11090

Quote:

---

Shelley's 1989 2.6 4x4

Though not an eye-catcher, this truck is her husband's baby. He prefers to work on it rather than any other vehicle, though a busy life hasn't allowed much fixing up: just keeping this daily driver running.
Attachment 10965

---

UPDATE
I spoke with Shelley yesterday...who phoned her husband, Jim, and we chatted. He's recovering from some major illness and intends to start fixing the truck up, once he gets to feeling better. I suggested he join the forum and keep us up-to-date with his improvements.

Thanks for the chat, Jim, and do get better soon! royster

Okay, this one is pure eye-candy, in our own Gallery. (Members: if you haven't spent some time looking through the Gallery, treat yourself to the journey).

This is ProSteet Arrow's truck on page three http://www.mightyram50.net/vbulletin...hp?albumid=322 (Members only...yet another benefit of joining the forum).

Attachment 11106

Spotted a 2nd generation D-50 locally, hooked up to a flat trailer...hope to get a story on it soon.

One more from the Gallery, because this 1986 johnbaker 2.6 4wd. of ragragtimetime's is so drop-dead (sexy?) good-looking it is just awesome.

Attachment 11149

thanks! johnbaker cam along with mikuni side-draft & johnbaker chrome header. the mikuni demanded a centrifugal fuel pump (burned out the electric diaphragm pump that came with the mikuni) to keep up with highway speeding (even though i purchased the cagle fuel pressure reglator). to keep an eye on all of this i mounted a fuel pressure guage in front of the steering wheel (yeah i know don't light up inside the cab). i plan to fire it up (someday when i have time) & will post a youtube link (sounds like a mean snowmobile). peace

I hope to see more of that, RRTT. That's one of the most awesome trucks I've ever seen, and I've seen quite a few.

Attachment 11152
___________________________________________

It is my hope to post a follow-up on Adam's 1959 Hillman and 1959 Peugeot 203 tomorrow: got some good shots (I hope) of them. (That IS, in fact, a photo of the very Peugeot he has: he took the photo).
Attachment 11151

___________________________________________
I invite members to participate and comment on this thread as they wish.

This 1963 Iguanamobile was built by Reptillia Motors Might Work LTD., in Polywog, Amfibbia. They were imported individually, and it was when they crawled ashore that the U.S. Coast Guard demolished much of the inventory slated for the East Coast. Thus, only 547 of them remain in captivity. This one was spotted in nearby Tadpole Lake Estates, and is reportedly owned by Congressman Phil R. Pokkets, rumored to be a Reptillian even though he runs on the Mammilian ticket, making scale. His involvement in the Lake Pirahnna Estates scandal has eaten away at much of his fortune, and he has resorted to selling snake oil in order to make ends meets...even though they shouldn't (it would create an Enzo).

Attachment 11153

I don't care for lowered trucks, but because of what I've seen on this site, I have an appreciation for workmanship and good, caring exicution.

This truck is laying on the North end of Woodstock, Virginia, for sale. I only took photos for those on the forum who do like lowered trucks. This one is not great by any stretch of the imagination. You certainly have something to compare it to here on MightyRam50.
(The '54 Olds in the background has been for sale for weeks).
Attachment 11271 Attachment 11272

Attachment 11273 Attachment 11274

It's a nice little truck just looks like it needs some love. But it's scary buying someone else's mini because you never really know how good the work is unless you know them personally. Thanks for thinking of us dropped guys Royster.

Dropped trucks aren't my thing, but I truly appreciate what goes into doing one RIGHT, bobbyk. If I ever see other dropped trucks, I'll certainly snag some pics.

Not sure what the story is on the Toyota, but it looks like the guy just gave up on it.

Figured at least ONE of you was interested in the '54 (or '55-6) Olds, so I got some eye~candy for ya.

Attachment 11287 Attachment 11288 Attachment 11289

Attachment 11290 Attachment 11291 Attachment 11292

Attachment 11301

1959 Hillman
Attachment 11302



Adam wasn't home when I stopped by today, so I took photos from outside the vehicle. The Hillman has been happily making its way up and down route 11 recently.
Attachment 11303 Attachment 11304 Attachment 11305

Attachment 11306 Attachment 11307

IN OTHER ADAM NEWS...
With the digital camera (thanks again, ragragtimetime) the D-50 with the snow plow...
Attachment 11308 Attachment 11309

...and the Datsun pick-up Adam does drive and is fixing up.

Attachment 11310

Next on LOCAL SIGHTINGS...What the hell is THIS?

Attachment 11311

It looks like a steam powered hillbilly TARDIS...

Quote:

---

Originally Posted by geezer101

It looks like a steam powered hillbilly TARDIS...

---

Attachment 11312


I got a full 5 minutes of laughter from that comment, geezer!

This is the original prototype for the microwave. You see that pen out to the left side; that's for the chickens. They grab a chicken from the pen, squeeze out an egg or two, pull it inside, butcher it, deep fry it or BBQ it, plate it and serve it out that side window all in less than 2 minutes. They called it InstaFrickinChicken or IFC. KFC became a subsidiary.

Good-a guess as any, ragragtimetime! There IS a walk-up window on the other side.

Speaking of Adam's world...I finally got the photos back from the developer (2 weeks?!) and the pics I took came out pretty good. The 1959 Peugeot...
Attachment 11343

...and the '59 Hillman, which is now on the road.
Attachment 11344


As regads the steam-powered hillbilly TARDIS traveling chicken franchise: it's actually quite amazing inside, and I'd like to get you guys some photos and the story. It's obviously an old Dodge pick-up, but the creator (I'm not sure his relation to Adam, but likely father) showed it off to me during one of my visits. Now I want to build one. It's placement, though a joke in our town, is not haphazard by any means. Though it lacks running water, it has everything else, woodstove notwithstanding.

The owner was not available for history on this 2nd generation D-50, but I'd seen it running around town (Woodstock). It has the sport cluster and what appear to be factory bucket seats. (Couldn't get a better shot of the interior, appologies). It is on a block where little trucks are plentiful, including some very old VW Rabbit pickups.

Attachment 11380 Attachment 11381

Attachment 11382 Attachment 11383

This is a standard flyer I carry with me, in case I have a Local Sighting. If there are any objections to the wording or information, let me know.

Quote:

---

MightyRam50.net http://www.mightyram50.net/vbulletin/forum.php
A forum for owners of Mitsubishi Mighty Max and Dodge Ram 50 trucks -
First generation (1979 - 1986) and Second Generation (1987 - 1996) with a
Forum just for 4-wheel drive trucks. The forum features virtually any help and specifications for these trucks, as well as a friendly community of knowledgeable enthusiasts. Feel free to visit us. Membership is free, and the site is supported by member contributions.

My user-name on the forum is “royster”, and I conduct an ongoing article titled “Local Sightings”. Your truck is of interest for this article, and I’d like your permission to photograph and post your truck on the forum. If possible, I’d also like to write a little about its history. My own Dodge Ram 50 is a 1990 4G64.

[ ] I have photographed your truck. If you wish to have it removed from the forum, please contact me - Roy [edited out for internet posting] You may use the same contacts to offer further information about your truck.

[ ] I would like to meet with you so I CAN photograph your truck and get its history from you. Please contact me if you agree to this. The information is not sold or exploited in any way.
Many thanks for your time and consideration! ~Roy

---

Attachment 11848

This was the first pic on the wall at a house I was working on today. 4 door mighty max.

This beautiful specimen I spotted right here on the forum, in the "Stock Trucks" sub-forum.
http://www.mightyram50.net/vbulletin....php?groupid=4

TruckRamRod provided this (and other) pictures of this beautiful Ram 50.

Attachment 15632

Check out this 4 door circa'91 Mighty Max (sort of) flat bed truck...starting from the 2 minute mark, for about 20 seconds.

https://www.youtube.com/watch?v=nankD4faZKM

...and what about the turbo Pajero at the start of the vid? :)

Spotted this spirited-looking Power Ram today. I was unable to talk to the owner, so I don't have any information about it, other than what you see.

Attachment 20153 Attachment 20154 Attachment 20155

Attachment 20156 Attachment 20157

Quote:

---

Members are encouraged to post their own local sightings.

---

https://trademe.tmcdn.co.nz/photoser.../751567782.jpg

https://trademe.tmcdn.co.nz/photoser.../751566475.jpg

BLASPHEMY!!?!?! :cussingblack:lol

Doesn't this thing run multiple coil packs? :scratchheadyellow: And it needs full headrest seats in it (so your neck doesn't break, causing your head to tear off and fly through the glass and into the tray...)

Just noticed the coil in the lion brown beer can. I wondered if the V8 would fit, I have a ton of space between the crank and radiator for an extra cylinder. Looks like something has been clearances for a bigger radiator tho

Quote:

---

Originally Posted by tortron

Just noticed the coil in the lion brown beer can. I wondered if the V8 would fit, I have a ton of space between the crank and radiator for an extra cylinder. Looks like something has been clearances for a bigger radiator tho

---

...I've got an old design diet Coke can on my washer motor :lmao:

[QUOTE=geezer101;60182]BLASPHEMY!!?!?! :cussingblack:lol

Doesn't this thing run multiple coil packs? :scratchheadyellow: And it needs full headrest seats in it (so your neck doesn't break, causing your head to tear off and fly through the glass and into the tray...)[/QUOTE

Lol . .. what motor is that ???jw?

Holden 5L-ish V8 https://en.m.wikipedia.org/wiki/Holden_V8_engine

I doubt it's got neck snapping acceleration, mainly because the tyres need to be about 3 times wider to not turn into smoke

A nice 89 4wd involved in a roll over. Maybe i will get a roll bar installed
https://trademe.tmcdn.co.nz/photoser.../754322892.jpg
https://trademe.tmcdn.co.nz/photoser.../754322973.jpg

Very surprised the driver lived tbh

Roll bar is on my list too. The only thing that stopped the PO of my wreck from having his head redecorate his cab was a flimsy tie down bar on the factory tray. He wasn't able to get out of the cab in a hurry too with the turret crushed over the doors...but he still drove it back to his house :surprised:

I'd imagine the local fire crew could have helped convert it into a convertable

The guy selling that ute won't part it out and wants 3500 for it
The tyres are a week old and the engine had just been rebuilt (hopefully not run upside down)
Oh and - it's still got 5 months of rego and wofs on it
Haha, good luck with claiming its legal to drive to the local constabulary

https://i.imgur.com/eyneJspl.jpg
A bit of life left in this old work horse

Attachment 20340

"great way to beat the rising house prices"

Technically not a LOCAL sighting, but an interesting 5 minute view of a 1979 D-50.

https://www.youtube.com/watch?v=taFlz-tPD40

Steve Magnante features an '87 Ram 50 in his Junkyard Crawl.

https://www.youtube.com/watch?v=o4dZQzK-dv8