DSM LOL. A mighty max build.

Well I recently re-aquired a 1994 mighty max. Had it just over 2 years ago, painted and cleaned it up, sold it, put a used ingine in it, new radiator, new clutch, and took out the front cut springs. Well the owner got a new car and left this back to me for round 2.

Plans:

Drop 4" front and rear
Roof rack
New mesh wheels 15x7. Later on (Wide wheels and streched tires)
Fix hood and cowel
Repaint silver/white/blue (one of those)
Repaint interior
Redo carpet
Battery relocation
New or refinished seat covering
Clean up engine bay
Headlight and turn signal conversion
Wood grain wheel
Add hitch and possibly build trailer for it

Performance:
Custom intake pipe
Turbo current 2.4L 8v sohc engine mildly (4-5psi)
T25 or 14B turbo from dsm
Blow up engine and rebuild or swap

(these are all the basic things I will be doing in the future, not in any order per say)

How it sits now, have not done a thing to it yet. A slow and steady build: Enjoy.

Attachment 6521

https://lh6.googleusercontent.com/-s...30824_0000.jpg

https://lh4.googleusercontent.com/-O...30824_0001.jpg

https://lh3.googleusercontent.com/-C...30824_0002.jpg

https://lh6.googleusercontent.com/-y...30824_0003.jpg

Kewl.....................I likey................................

Looking forward to see what happens.

Nice looking truck, man. Mine is similar condition (paint not buffed yet tho)..need buckets also, benchy is goney;)! also.. Going diesel for now, as I put a deposit on a new 2.5 4d56 Friday. Going to play with it and she what I can get reliably from it ...planning to stay somewhat sane to keep hwy mpg decent (and reliable), as its a dd, and used for work. Haul trailers and solar panels etc.

Got it into the garage and checked everything out. Needs more work than I had thought.

Rust on the roof and missing the top molding:

https://lh6.googleusercontent.com/-e...30908_0000.jpg

The hood, supports, and the cowl are all damaged good time well. Will be making due for now, untill I can find a nice hood.

https://lh4.googleusercontent.com/-n...30908_0001.jpg

https://lh4.googleusercontent.com/-X...30908_0003.jpg

Rear of the bed needs alot of work also, will hold out and wait to find a good donor.

https://lh5.googleusercontent.com/-T...30908_0004.jpg

https://lh6.googleusercontent.com/-V...30908_0005.jpg

And a shot of the front end, the s10 lip I made has been through a bit of stuff, its going to be removed and fixed.

https://lh4.googleusercontent.com/-P...30908_0007.jpg

That roof rust is a strange spot to get rusted. You'd think it would run off and find a pocket to puddle in somewhere, hmmm
I just found a little on my truck, just below the drivers door where they put a molding seam in the body.
Well, you got something to do for fun...:)

WOw, That roof rust is scary! I'm going outside rightnow to check mine..(Its under the center light, correct?) That damn light probably holds moisture there and rusts like crazy, once seals go..and thats usually in 5 to 6 yrs or so, LONG ago on my 1995! Ypur paint is in waay better shape than mine tho..Gotta get all mechanical work done first. I got a bumper hitch from u pull it for 40 +8 tax, and put a h frt receiver on it..workd GREAT and cheap! Sanded and painted it up, and the bumper is plenty stout, made of 1/4 plate steel! and lots of it! (unless u want to keep the "rolled" rear look (which is cool also). The 1st gen bumpers will fit as they are the exact same. New ones are 450, I think...NO THANKS!

@ Brad: Yeah its a very odd place to find rust. I hope Ill be able to fix it enough to last a while.

@ Thill: I painted this truck myself over 2 years ago using duplicolor ready to spray paint from the part store, and some regular 2 part clear coat. Its held up alot better than I though it would for the price. The rust in the picture is above the windshield actualy, not the rear window. And it seems to be the only place I have found rust. Very odd.

Hope to spend a little time this weekend on it and see what I can do.

Florida rust? who'd have thought? ... defective sheet metal? like the grill.

Shoot, you live on the coast like me, rust is possibly worse on some cars then up north. If you live on the bay or next to it, the salt water will eat these up! Luckily im far enough away that its not that bad on anything I own. (other than this spot)

Just ordered a new shift knob, a large 6" bubble "drift" style, if you will, clear knob. I wanted something larger as I have a knob from a 2G DSM on it at the moment and its just to dang short, I am tired of reaching down and nearly leaning over to grab it. Also, some 3" blocks for the rear, and som e upper ball joints so I can install the cut springs again. Finish the interior, the front lip, and the bozo style exhaust and take it for a little photo shoot.

-laters'

Update:

Some new parts that arrived, shifter and lowering blocks.

https://lh3.googleusercontent.com/-V...30919_0000.jpg

Junk yard adventure, found a parking lamp, and a valve cover that I can use to paint and add to the engine.

https://lh3.googleusercontent.com/-u...30923_0002.jpg

https://lh3.googleusercontent.com/-C...30923_0003.jpg

A sweet little Mitsu work truck I wish I could have. What a shame!

https://lh5.googleusercontent.com/-u...30923_0004.jpg

INterior work. New handle and new carpet floormats installed.

https://lh5.googleusercontent.com/-I...30925_0000.jpg

https://lh6.googleusercontent.com/-P...30925_0002.jpg

Front end lip damage and fixed. Other shot, sits to high. To high...

https://lh4.googleusercontent.com/-g...30925_0004.jpg

https://lh4.googleusercontent.com/-H...30925_0010.jpg

Those carpet mats are nice. All one piece and no more mat slipping up under the brake and clutch peddles. Where did you come up with those?

i see u re-aquired it.. i was just lookin at ur old thread a few mins ago then I saw this. good progress so far. and like Brad asked, x2 on those mats? looks awesome as one piece

Lol, Yeah I gots it back. Thanks fellas.

The floor mat is for a 11-13 Kia sorento 2nd row. I had an extra one so I decided to use it. Looks really nice and your right no slipping at all.

Hope to be going to the junk yards in the next couple weeks again for some seals and these wheels:

http://www.originalwheels.com/nissan...eels-62335.jpg

Paint them white, is the plan.

some of the kia sedona have 6 lug wheels

Yeah all the ones from 2006+ have the exact same 6 lug. Problem is the KIA's have a stock offset of like 45 - 50. I test fitted one, witout a large spacer it hits the upper controll arm. And they dont realy look cool. Those others are from a nissan pathfinder, should be a bolt on affair. 15x6.5, so not very large but I love, LOVE mesh wheels.

look for isuzu trooper they had mesh wheel

Yep, Ive looked at those too. Luckily for me a yard with the nissan wheels is close to me. And I have a free set of used 15" tires that are near perfect size.

Some teaser pics: Before and after seat cover.

Test fitting the roof rails. Sorry for the fuzzy pics, didnt realize it untill I uploaded it. Ill be getting better ones once I finish the hood and pull it back outside.

https://lh4.googleusercontent.com/-C...30928_0000.jpg

https://lh5.googleusercontent.com/-e...30928_0002.jpg

https://lh4.googleusercontent.com/-K...30929_0000.jpg

https://lh4.googleusercontent.com/-X...30929_0002.jpg

I wanna see this thing with a turbo. Lol.

You didn't want to switch to buckets? Also I had mush more rust then you around the windshield. The drivers side bottom corner rotted to almost nothing and the glass cracked because of it. I wanna say atleast 7 different spots.

Yeah eventually Ill turbo it. I had DSM bucket seats in it for a while back when, but I like the bench better. It shall stay for now.

I just ordered a new intake filter, mushroom style, will fit my custom intake set up to it, and all new lights from thailand. Clear bumber lights, clear 2 way corner lights, and red/clear tails... very excited to see them.

The lights will look good on the truck, I have everything you listed
http://imageshack.us/a/img90/8269/gopr0256.jpg
http://imageshack.us/a/img41/2807/imagejpeg23tx.jpg
http://imageshack.us/a/img841/2860/imagejpeg22s.jpg

Nice truck! What tire size are you running?

Rahtid, truck looks great. Those titan wheels? Can't wait to get my lights in, those are all the exact same ones I ordered. lol

Some other pics of the rack:

https://lh3.googleusercontent.com/-R...30930_0002.jpg

https://lh3.googleusercontent.com/-e...30930_0004.jpg

https://lh3.googleusercontent.com/-8...30930_0006.jpg

Hope to do some more this comming weekend.

The tire size are 235/40/18 on the titan steel wheels,

Any cutting or anything to get those to fit, I assume they are just like the alloy titan rims that the center hole is to small.

yeah i had the center bore machined

Figures. Cool wheels though.

for the rear tail lights i would check out these amber 1156 led for the turn signals,http://www.ebay.com/itm/2-x-1156-AMB...item43bb84885c

Dude, I was going to do that exact thing when I got them. I am also going to run my blinkers to the corner lights and get some LED super yellow bulbs and turn my bumper signals into a running/fog light.

Got these today:

https://lh5.googleusercontent.com/-V...31016_0004.jpg

https://lh4.googleusercontent.com/-N...31016_0000.jpg

spray them with a quality clear to prevent them from yellowing.

careful with the tail lights, the center screw on the inside can cause the the lenses to crack

Those are Purdy! :))

Have you seen them yellow? The clear lens I assume.

Yes they WILL turn yellow, and it looks like crap

Thanks for the heads up guys, Ill be clear coating them before I put them on for the road.

Here are some teasers of my new stuff, once my garage get fixed ill be able to get better photos, but its stuck down and the truck is stuck where it is.

https://lh5.googleusercontent.com/-U...31021_0000.jpg

https://lh4.googleusercontent.com/-9...31021_0001.jpg

https://lh3.googleusercontent.com/-b...31021_0004.jpg

https://lh6.googleusercontent.com/-l...31021_0007.jpg

Cool truck man. If you wanna make a trip to Jacksonville FL I have a nice truck bed to sell. Also have an old cab that can cut patches for your roof .

Ill be going out to gainsville around thanksgiving time. I wish I could grab the cab and bed but thats to much at the moment. You have any modlings or seals for the doors or windshield? I may try and take something like that from you.

Did some work on the rustey ol roof.

From this.... to that...

https://lh3.googleusercontent.com/-e...30908_0000.jpg

https://lh5.googleusercontent.com/-9...31202_0003.jpg

And a couple randoms...

https://lh5.googleusercontent.com/-Y...31114_0004.jpg

https://lh4.googleusercontent.com/-6...31114_0005.jpg

https://lh6.googleusercontent.com/-6...31116_0000.jpg

Installed one side of the new lights and the new wiring set up for them.

https://lh5.googleusercontent.com/-Y...31221_0006.jpg

https://lh4.googleusercontent.com/-4...31221_0007.jpg

https://lh4.googleusercontent.com/-Y...31221_0009.jpg

https://lh4.googleusercontent.com/-w...31221_0010.jpg

https://lh4.googleusercontent.com/-g...31221_0013.jpg

https://lh4.googleusercontent.com/-W...31221_0014.jpg

https://lh3.googleusercontent.com/-u...31221_0015.jpg

NEW:

https://lh5.googleusercontent.com/-B...31221_0016.jpg

OLD:

https://lh3.googleusercontent.com/-w...31221_0017.jpg

Test fitting some wheels I need adapters for. First side pic is with about 2" from hub, the 2nd is about 2.5".
Wheels are 18x7, and 5x114.3.

https://lh4.googleusercontent.com/-x...31221_0002.jpg

https://lh5.googleusercontent.com/-G...31221_0003.jpg

https://lh5.googleusercontent.com/-X...31221_0004.jpg

https://lh3.googleusercontent.com/-4...31221_0005.jpg

(dont mind the bird poo, sorry)

Couple of the new headliner installed and all the light on and working... Ill be sad to see it go, its a great truck. It is for sale locally, 1 potential buyer at this time.

https://lh5.googleusercontent.com/-R...40201_0000.jpg

https://lh4.googleusercontent.com/-H...40201_0002.jpg

https://lh5.googleusercontent.com/-9...40201_0003.jpg

https://lh3.googleusercontent.com/-P...40201_0004.jpg

Looking good, will be a sad day to se it go, if so refer them to the site maybe.

Yeah it will. But from what it sounds, should be a good home for it, I think they also checked out my truck on here, so they do know of it.

https://lh3.googleusercontent.com/-R...40204_0002.jpg

https://lh5.googleusercontent.com/-_...40204_0003.jpg

I did check out the truck on here and it is in good hands.

I'm the new owner of the beautiful truck. So if you guys want to follow the progression then I'll make a new thread.

Thanks sleeps, she's a beautiful truck and a lot has been taken care of already and there is more to follow.

The civic is fun, but its not the same. Im sure Ill find another one in the future.

I got rid of my 2 civics for fear of em getting stolen, and the other civic cause I had too much cars at the time. Lol. Have fun with it.

Sweet build! Definitely following