Printable View
When I finally start on the 86 ram 50, I will do a step by step pictorial on how to put the seats in these trucks. I will even make some drawings of adaptors that you will be able to make to get the seats in the right position for your needs. I want to see all of you get these seats in correctly and safely, after all I want to see you enjoy your trucks, not hate them.
nice.. what car did they come out of? :thumbup:Quote:
Originally Posted by MaxinOut
thank u sir! this topic has been a confused mess for too long.. a tutorial would be cool. I'm more of a "visual" person too and pix help! :grin:Quote:
Originally Posted by pennyman1
Got any pics? I just don't get why you buckets sit so high. You must be real tall.Quote:
Originally Posted by 92bluemax
To be honest I don't know, the person I purchased them from didn't know either. He thought they probably came out of some sort of hondaQuote:
Originally Posted by ikeepzitclean
^ im gonna try something here when Im done dropping da motor back in my truck.. Ima see if I can fit a pair of older Benz seats in my truck.. I have 2 older Benz's and those seats are sooo damn comfortable. I'll see if I can fit them.
Ok, but post pics.Quote:
Originally Posted by ikeepzitclean
Is that center shifter bezel from a Acura Integra?Quote:
Originally Posted by Sergio T
will do.. i'll include info in my build thread if I go w/ that option.Quote:
Originally Posted by Sergio T
Sorry bout the pics, we have no internet, so we have to ride to town to get wi-fi
The rails for the 1st and second gen are almost identical, the only difference is in the mechanism that makes the seat slide. They are interchangeable, the bolt pattern length and thread in the cab is the same.
A friend of mine is gonna fab of some brackets to make the buckets fit
After all of this time ,I finally go my buckets installed with minor farbrication of the brackets,and drilling and tapping new bolt holes close to the transmission humpAttachment 5615:clap::grin:
Looks good!
Hurrray! finally. Now go get yourself a matching steering wheel cause it looks like doo-doo :lmao:Quote:
Originally Posted by 92bluemax
and a center console would be cool also.
Be sure you go under truck and silicone those bolt ends.
didnt have to drill thru floor,just the brace on the top of floor
My steering wheel cover is real tree camo, you must realize im from the country,and my ride is a 4x4:slap:Quote:
Originally Posted by BradMph
When the bench finally died in my '90MM I put in some 2nd gen Honda Prelude seats I had from a parts car. I just used a generic mounting kit and the factory rails from the parts car and bolted them to the floor.
Now after reading this thread I'm going to see if the Prelude seats will mount up to the MM bench rails for my new '93MM. :)
Quote:
Originally Posted by 92bluemax
damn.. is it just me or those seats seem hella wide? bottom cushion at least seems that way
any word on this? and i thought '90 and '93 MM rails are same, no?Quote:
Originally Posted by LON MOER
my bench is gettin on my last nerves, im gonna burn it i swear! :shakehead: lol plus I have a extra pair of 5th gen seats from a lude and i'd like to put those in if they work.
I changed my mind about using my Benz seats cuz they're leather and summer is a bishhh w/out AC in this thing plus leather dnt help in this Cali heat..
I'm not sure what you are asking.Quote:
Originally Posted by ikeepzitclean
From reading this forum, I would be comfortable saying that the saet rails are the same across the generations of the truck.
I just wasn't smart enough to figure out to use them when I installed my seats, which seems such and obvious answer now.:(
Using the 'universal' mounting kit was a PITA. I easily mounted each seat a dozen times, cutting brackets and adding washers and spacers, trying to get the seats to sit straight and level. :(
When I go seat hunting, I usually look in the celica, or neons, and other sporty small cars. I look for a low styled seat because I don't like sitting up to much on the wheel. Make sure the seat hinges both directions and you get a good slide from the rails. Get a tough tweed fabric and try to stay away from valure or crushed corduroy because its hard to clean and gets dirty real fast. Look also for darker color seats, again, dirt can make a new seat look old fast. Our wrecking yards sells a pair of any seats you find for only about $14 to $17 for the pair. At those prices, you can find your carport collecting seats very quickly.
These are old IROC buckets that are being replaced soon while my truck is down getting rebuilt.
Attachment 5891
Bring a tape measure with you also. You can fudge an inch or so by bending the rail legs or remounting the rails. They don't always have to be a direct fit to make them work. Find your favorite seats and make them work.
Where they longer or shorter? first gen VS second gen?Quote:
Originally Posted by 92bluemax
they just needed to have a few holes drilled because the seats didnt match up with my holes in the floor so new holes and shortening the front brackets and re-welding them solved it all
Brad,
Where did you get that console..Nice! I want one!! and buckets! I have new HP seats for the M3, so was going to recover the Vaders with cloth, and use them in my MMAx..the console would REALLY make it a nice and more modern, usable interior! Nice job OP on seat install!
Someone asked about first gen buckets install. My bought new in 1984 Ram 50 TD sport had buckets (VERY NICE and comfortable ones too, by the way!) Maybe find a pair and recover them? Some on here are parting a few out, tho not sure about seats...