Printable View
Hey guys I've been doing a ton of research and cannot find a replacement Valve Cover for my 4g64 SOHC truck the one on it is cracked. I know that the 92 galant SOHC valve covers can work but the throttle cable bracket needs to be remounted. Anyone done that before? Or is there a good aftermarket that looks better and doesn't require modification?? Thanks for the help :)
Hi and welcome to mightyram. The Galant has the 'Cyclone' valve cover right? It would look cool in the truck. Making a stand-off to mount a cable should be relatively easy. You might be able to use the intake manifold studs as the mounting point to secure the modified throttle cable support. There's very limited aftermarket support for SOHC engines and as far as I know there are no non-genuine valve covers available. There doesn't look like there's a lot of room to monkey around with at the back end of the rocker cover.
Grandads truck has the cyclone valve cover on it, maybe a nz market thing
Thanks for the replies, I'm probably going to put that galant cover on it and just remount the throttle cable. I was thinking about flipping the mount and putting it on the firewall and have it above the cover. but that Idea is good for putting the bracket on the cover mounting bolt it would probably work a bit better to.
Put a 3rd hole in the valve cover to hold the throttle cable ~ use the same rubber grommet method to seal it off ~ check clearance between valve cover and cam train ~ use countersunk fastener if neededQuote:
Originally Posted by Chickenhawk
Do you like this idea ?
Don't put the cable bracket on the firewall - the engine moves around on and off throttle, the firewall doesn't. It will do some scary things. And it looks like the cable already runs along the only place you could fix the bracket to. Xbox's idea isn't bad. You could drill a hole where the mounting stud should be, put a washer and rubber seal on a bolt and push it through from the inside, drop on another rubber seal and washer from the outside and use a flare nut or nylock to clamp it all together.
Brilliant "THE ENGINE MOVES / THE FIREWALL DOES NOT" the world needs more real mechanics like geezer :yellow:Quote:
Originally Posted by geezer101
I ended up finding a OE replacement thanks for all the responses. and I understand the throttle cable bracket moves was just thinking how to route it if I did end up using a galant valve cover