Could some one please measure the dip stick length from the top of the rubber seal to the tip. When I got the truck the rubber part was torn off and floated so I pulled one from a 93 mighty max and I'm not sure if it long enough.
Printable View
Could some one please measure the dip stick length from the top of the rubber seal to the tip. When I got the truck the rubber part was torn off and floated so I pulled one from a 93 mighty max and I'm not sure if it long enough.
So your are using a "93 dip stick for a "90 truck if I read your message correctly? Also, are you using a 2.6, 2.4, 3.0 motor still? need this information if you want a correct measurement.
I have a 90, 2.4 4 cylinder and I took a dip stick out of a 93, 2.4. The dip stick was longer on the 90 but the rubber part that caps off the stick was sliding up and down the stick so I don't know if it should sit deep in the engine than the one i am using from the 93. I don't see oil on the 93 stick even thought I put 5 quarts in when I changed the oil 50 miles ago.
I still need some one to measure their dipstick so I know if mine is OK. I want to do the diesel flush as I have the dreaded tick and I don't want to over fill the crankcase. I can't find any info on line.
On my 4G64 it measures 8 - 5/16 to the very bottom of the rubber stopper.
Attachment 20334
thank you so much for your help