Printable View
Will an Isuzu trans fit in our MM I have an 89 or 90 Isuzu I picked up for a 1$ so that I could use the front bumper bucket seats Ana few other things an I was wondering if the transmission will work since it is a hydraulic clutch an I'd like to switch to that anyways? Any an all help is greatly appreciated.
You can make anything fit anything depending on volume vs money but seeming the Isuzu is a similar design and size you could do a full drivetrain swap. Adapting the transmission to the 4G64 engine will take a lot of messing around though. The biggest issue with converting mechanical to hydraulic clutch is the cable clutch mechanism pulls while the hydraulic pushes. Have a look at how the hydraulic system works on the Isuzu and see if it can give you some clues on how to adapt it.
If this turns out to fit or needs mods to fit, be sure to post that information for future reference. Valuable Information. :)
try projectzero.org or hotrodcoffeeshop.com for more info on tranny swaps to 4g63/64
Thanks everyone. I knew I was gonna have to swap the whole system if I did. The reason I asked is because I bought it for a dollar an that's cheaper than I can get a montero sport for which has the exact tranny I need.