in search of

Printable View

11-22-2016, 07:06 AM
jamesw

3 Attachment(s)

in search of

1988 dodge ram 50 sport 2.6l
does anyone know where i can get the door latch catch *pls see pics* (driver side)
Attachment 17972 Attachment 17973 Attachment 17974
as you can see most of the rubber is gone off which in turn makes the door rattle.
the passenger side is gone all together.
i would like to get the part replacement but will entertain any ideals on how to fix this.
i have looked all over the place to find the replacement parts ebay,rockauto,googled it haven't found anything.
so if you have a ideal or a link to where i might get this then please post thanks
11-22-2016, 08:40 AM
Jeff V.

Have you tried any dealers? The part number is MB574967 (same for both sides). It looks like it was used on the trucks, an old Mirage, and the Galant until 1990. So it might still be available.

Just for the hell of it, I tried eBay. This place claims to have 3 on hand. Get em quick :thumbup:
http://www.ebay.com/itm/MITSUBISHI-M...VXGIng&vxp=mtr

Googling the part number also shows some hits for a Proton part in Malaysia. Proton re-badged a lot of Mitsubishi stuff. Good luck finding a contact to actually purchase the stuff though.

It looks really similar to every other Mitsu striker I've seen, so even if the part number doesn't officially interchange, it's possible a striker from some other model will work just fine.
11-22-2016, 10:21 AM
t97

If you can't get it let me know I can go check the yards around here. Also how are the seals on your doors? Mine are in the same condition as yours and when I replaced the seal that goes around the door frame it stopped the rattling.
11-22-2016, 10:44 AM
haruman

Couldn't you use something like Plasti-Dip to re-coat that part? I would think that would be pretty easy to do.
11-22-2016, 11:58 AM
Jeff V.

Plastidip would be too soft.
11-22-2016, 03:18 PM
jamesw

Quote:

Originally Posted by haruman

Couldn't you use something like Plasti-Dip to re-coat that part? I would think that would be pretty easy to do.

see i had thought about that too but then i also was wondering like jeff said it would be too soft so i think i,m going to go with jeff's link on ebay thanks to everyone for your help on this :thumbup:
11-22-2016, 03:19 PM
jamesw

Quote:

Originally Posted by Jeff V.

Have you tried any dealers? The part number is MB574967 (same for both sides). It looks like it was used on the trucks, an old Mirage, and the Galant until 1990. So it might still be available.

Just for the hell of it, I tried eBay. This place claims to have 3 on hand. Get em quick :thumbup:
http://www.ebay.com/itm/MITSUBISHI-M...VXGIng&vxp=mtr

Googling the part number also shows some hits for a Proton part in Malaysia. Proton re-badged a lot of Mitsubishi stuff. Good luck finding a contact to actually purchase the stuff though.

It looks really similar to every other Mitsu striker I've seen, so even if the part number doesn't officially interchange, it's possible a striker from some other model will work just fine.

thanks jeff your the best i looked and looked i guess it helps to look for the right name of it lol
11-22-2016, 03:23 PM
jamesw

Quote:

Originally Posted by t97

If you can't get it let me know I can go check the yards around here. Also how are the seals on your doors? Mine are in the same condition as yours and when I replaced the seal that goes around the door frame it stopped the rattling.

thanks for the help t97 my seals seem to be in great shape so far. we don't have any place around here that deals in later trucks like mine so if your lucky enough to have a place you might want to stock up on stuff it's getting hard to find stuff thanks again for the advise and help :thumbup:
11-22-2016, 04:47 PM
Jeff V.

Quote:

Originally Posted by jamesw

thanks jeff your the best i looked and looked i guess it helps to look for the right name of it lol

No problem. I'm glad I could help. The two best tools I have are my service manuals and the Mitsu ASA parts application. :)
11-23-2016, 08:57 AM
Chargerx3

You can rotate the one 180 deg as the other end is still in great shape. If you still need one I have an extra lightly used unit.
11-24-2016, 03:14 PM
jamesw

Quote:

Originally Posted by Chargerx3

You can rotate the one 180 deg as the other end is still in great shape. If you still need one I have an extra lightly used unit.

thank you sir i had thought of that but after i looked at it real close i seen that it was cracked all the way so i went ahead and bought some off ebay that jeff v had found for me but thank you for the thought :thumbup: i,ll keep you in mind if the ones i bought doesn't work out for whatever reason.