PDA

View Full Version : 86 2.0 Starting Issues



ZachV
11-16-2024, 06:47 PM
Hey guys I’ve reached out before about my truck I’m still having issues with it sadly. Bit of a backstory the MM was driving really well I replaced the carb and installed a aftermarket Weber. I just installed a new head unit and 4 way speakers in it. Everything was fine for a week or so after then one day I parked it and it won’t do anything with the key in the ignition. I checked my fuses and I checked the battery. I was told on here about fuse links off the battery but I can’t find them it seems my battery only has the positive cable running off it straight to the starter. I would appreciate some more advice cause this truck is my daily it’s really hurting me just sitting parked. Thank you!

1600cc
11-17-2024, 02:06 AM
The fusable link isn't on the starter cable, it's on the other wiring that should be attached to the + battery terminal. There'll be a short black wire , then an inline male/female plug pair, then a green coated piece of wire (this is the fusable link), then another inline plug, and it will then be a white wire into the engine bay loom conduit.

camoit
11-17-2024, 02:59 PM
Yep. If everything is dead. It's the fuseable link. It will be burnt. It's normally connected to the + cable at the battery. But someone might have moved it.But it's still the other large wire off the battery or next to the battery at the harness.

xboxrox
11-17-2024, 10:01 PM
Maybe the fusible link wire melted due to powering your stereo..? Might consider running a separate power line to the battery (selonoid/relay too?) ??

ZachV
11-18-2024, 07:01 AM
Thank you guys for the replies I’ll have to post some pictures I have nothing that I can see coming off my battery other than the actual cable.