Clutch cable

[xboxrox]

This post is in regards to a manual transmission 4X4 1986 Power Ram50 which requires a 31.5" length clutch cable...

PROBLEM: My truck had hard shifting because an ATP Y410 clutch cable was installed (it is 32.375" long for RWD trucks)...

FIX: Installed the proper length clutch cable a Pioneer CA-217 from AUTOZONE which measured 31.5" clevis to clevis at the pull surfaces...

Also installed a new Mitsubishi firewall clutch cable grommet;truck shifts much better now... Photos: (Hope this helps folks)

http://www.mightyram50.net/vbulletin/attachment.php?attachmentid=28520&stc=1http://www.mightyram50.net/vbulletin/attachment.php?attachmentid=28525&stc=1http://www.mightyram50.net/vbulletin/attachment.php?attachmentid=28521&stc=1http://www.mightyram50.net/vbulletin/attachment.php?attachmentid=28526&stc=1http://www.mightyram50.net/vbulletin/attachment.php?attachmentid=28522&stc=1http://www.mightyram50.net/vbulletin/attachment.php?attachmentid=28523&stc=1http://www.mightyram50.net/vbulletin/attachment.php?attachmentid=28524&stc=1

[EL.95MAX]

Thanks …����I had a similar problem like that back in the days I brought a aftermarket cable .. my reverse Would grind and second gear will grind ..but back then the dealer still sold the cable so I bought it from the dealer