A/C Tensioner pulley with Long bolt adjuster

[Mightyg]

I'm having a really hard time finding this pulley. I've ordered one thinking it was the correct one since it was advertised as the Accessory pulley, but was still incorrect. Can someone point me in the right direction.

[geezer101]

Is it a ribbed or V belt? I found this listing for a ribbed belt - https://www.ebay.com.au/itm/Dayco-Idler-Tensioner-Pulley-89029/163904309198?fits=Model%3ATriton%7CMake%3AMitsubis hi&epid=1643397479&hash=item26297547ce:g:Tg0AAOSwoaNdo2KP

Need to do some part# cross referencing...

[Mightyg]

Is it a ribbed or V belt? I found this listing for a ribbed belt - https://www.ebay.com.au/itm/Dayco-Idler-Tensioner-Pulley-89029/163904309198?fits=Model%3ATriton%7CMake%3AMitsubis hi&epid=1643397479&hash=item26297547ce:g:Tg0AAOSwoaNdo2KP

Need to do some part# cross referencing...

Its V belt. The auto part stores have trouble looking it up too

[geezer101]

Well, here goes attempt #2 - https://www.ebay.com/itm/NULINE-A-C-TENSIONER-PULLEY-FOR-Mitsubish-Triton-MJ-8-91-10-1996-2-6L-4G54-Carb/302404433433?_trkparms=aid%3D111001%26algo%3DREC.S EED%26ao%3D1%26asc%3D40719%26meid%3Db31ed0d9b9bb4a 3a987ba1aaa4390a7b%26pid%3D100970%26rk%3D2%26rkt%3 D14%26mehot%3Dnone%26sd%3D223073475495%26itm%3D302 404433433%26pmt%3D0%26noa%3D1%26pg%3D2380057&_trksid=p2380057.c100970.m5481&_trkparms=pageci%3Af86e644d-3829-11ea-94fb-74dbd180863c%7Cparentrq%3Aad0da45a16f0a489bf88fea6 ff71a43d%7Ciid%3A1

It has the pulley dimensions on it so it might be a match - :shrug:

Don't forget they sold Mighty Max under different names so remember to not limit your searches.

[Mightyg]

Well, here goes attempt #2 - https://www.ebay.com/itm/NULINE-A-C-TENSIONER-PULLEY-FOR-Mitsubish-Triton-MJ-8-91-10-1996-2-6L-4G54-Carb/302404433433?_trkparms=aid%3D111001%26algo%3DREC.S EED%26ao%3D1%26asc%3D40719%26meid%3Db31ed0d9b9bb4a 3a987ba1aaa4390a7b%26pid%3D100970%26rk%3D2%26rkt%3 D14%26mehot%3Dnone%26sd%3D223073475495%26itm%3D302 404433433%26pmt%3D0%26noa%3D1%26pg%3D2380057&_trksid=p2380057.c100970.m5481&_trkparms=pageci%3Af86e644d-3829-11ea-94fb-74dbd180863c%7Cparentrq%3Aad0da45a16f0a489bf88fea6 ff71a43d%7Ciid%3A1

It has the pulley dimensions on it so it might be a match - :shrug:

Don't forget they sold Mighty Max under different names so remember to not limit your searches.

Yea. I remember, thanks for your help but unfortunately that's not it either. Looks almost exactly like this. But this one says it's for a v6

1990-1994 Mitsubishi Mighty Max Drive Belt Tensioner Pulley - API 2008-481903 - Alternator - PartsGeek.com
https://www.partsgeek.com/bd6hrbm-mitsubishi-mighty-max-drive-belt-tensioner-pulley.html

[claych]

Try Dayco # 7093-05032708 or Dorman #W0133-1859045 .
Also if memory serves the bearing can be replaced alone,
price range from $2- $10.:)

[Mightyg]

Try Dayco # 7093-05032708 or Dorman #W0133-1859045 .
Also if memory serves the bearing can be replaced alone,
price range from $2- $10.:)

Oooooh! Didnt think of that. Thanks Claych

[geezer101]

I've done a bearing swap on an idler. Cheaper and easier than trying to get a replacement pulley. Claych nailed it by suggesting the obvious - we should've asked if you were only replacing the pulley due to a dead bearing :rolleyes: