gas filler neck ????

[maxdsm]

Going to be changing my gas filler neck in the next week or so . My old one IS rotted out . Is there an easier way without having to drop the tank to get to it ??
thanlks

maxdsm

https://www.fillernecksupply.com/d50-mighty-max-rubber-fuel-filler-hose-main-mb504933/?gclid=EAIaIQobChMIi6eI6tDx2gIVhTuBCh0GSQAPEAQYASA BEgKyW_D_BwE

[geezer101]

If it's anything like the Gen 1 - no. It will make your like easier with getting to the clamps anyway. And you can give the tank a big clean and inspection while it's out.

[pennyman1]

either that or pull the bed - neither is a simple choice. Is it the metal neck or the rubber hose?

[maxdsm]

rubber hose and thanks .

[mikec96]

Shouldn't have to drop the tank. I just replaced the hose going from the tank to the filler neck. The clamp on the top of the tank was a bit difficult but not impossible to get loose. As for the filler neck itself there should be a panel on the inside of the bed you can pull out to help make removing the filler neck easier.

[maxdsm]

Excellent advice thank-you . Attempting this weekend .

[maxdsm]

Replaced this weekend was a breeze . Dropped the tank (4 bolts) and removed tire and panel which made it very simple. Thanks Again everyone for the fast replies.

[maxdsm]

Also found I needed to change the return line gas filter .