New to the site!

[kubotaman]

Hi, I'm on my third Ram 50. I've installed a Kubota diesel in it and am searching for a way to change the diff. ratio. From my meager calculations I would like to have 3.25 to 3.5 to 1 if possible. All suggestions welcome. Thanks for this site, I'm sure I will enjoy it!

[tortron]

Hey, you might have some luck with a Mitsubishi scorpion diff. They had 3.3:1 on the 10 bolt diffs and 3.5:1 on the 8bolt (weaker) ge auto

The 10 bolt diffs are the same as the truck so should swap in alright, or just the head of you need

[geezer101]

Hi and welcome to mightyram. You can use a Gen 1 Montero/Pajero/Shogun etc rear diff. You can also use a Gen 2 truck diff and will more than likely be easier to find and swap in. A post in another thread, same topic - http://www.mightyram50.net/vbulletin/showthread.php/6867-2nd-gen-Pajero-Montero-rear-ends?p=59224&viewfull=1#post59224