Crankshaft position sensor wiring diagram

[Phuzy_nutz]

No start. Been following this guide http://easyautodiagnostics.com/mitsubishi/3.0L/ignition-system-tests-5 Traced the issue to the Crankshaft position sensor not receiving voltage.

does anyone have a diagram of the Crankshaft position sensor?

[LSR Mike]

Well It's actually the Cam Angles Sensor, It's in the base of the Distributor under a easy to remove metal cap.

Wiring Diagrams are in the 216 manuals post http://www.mightyram50.net/vbulletin/showthread.php/811-Over-216-Manuals-2nd-Gen-Manual-inside

[Phuzy_nutz]

Well It's actually the Cam Angles Sensor, It's in the base of the Distributor under a easy to remove metal cap.

Wiring Diagrams are in the 216 manuals post http://www.mightyram50.net/vbulletin/showthread.php/811-Over-216-Manuals-2nd-Gen-Manual-inside

Thank you so much for that link. Been digging through the diagrams for a few hours and still cant find what i'm looking for. I'll keep looking.

[Jeff V.]

Well It's actually the Cam Angles Sensor

The distributor on the V6 has sensing functions for both cam and crank position.

[LSR Mike]

MY bad, I didn't look at his engine type, as usual I assumed the 4 cylinder....hit up the 3000GT forums