BJH324JH
11-19-2016, 07:54 PM
Power steering gear box tool for Mitsubishi Mighty Max and RAM 50.
This template is the equivalent to MILLER MB990852. (http://s11.postimg.org/dpl2eoyqb/MILLER_MB990852.jpg)
Tool is 1/4" thick. You will need to weld a 1" diameter socket with a 1/2" square drive to the end of the tool. With the provided template you can easily make this tool. (In my opinion)
Here is how to print the template properly (Windows XP):
http://www.mightyram50.net/vbulletin/attachment.php?attachmentid=17964&stc=1
PDF Template:
17965
SVG Template:
19538
Tool in use, picture from this manual:
http://www.mightyram50.net/d-50/Factory_Manual/19_STEERING_MANUAL_AND_POWER.pdf
http://www.mightyram50.net/vbulletin/attachment.php?attachmentid=19066&stc=1
You can use a punch to get the locking nut loose, but that dings it up pretty bad.
Any questions, feel free to ask.
This template is the equivalent to MILLER MB990852. (http://s11.postimg.org/dpl2eoyqb/MILLER_MB990852.jpg)
Tool is 1/4" thick. You will need to weld a 1" diameter socket with a 1/2" square drive to the end of the tool. With the provided template you can easily make this tool. (In my opinion)
Here is how to print the template properly (Windows XP):
http://www.mightyram50.net/vbulletin/attachment.php?attachmentid=17964&stc=1
PDF Template:
17965
SVG Template:
19538
Tool in use, picture from this manual:
http://www.mightyram50.net/d-50/Factory_Manual/19_STEERING_MANUAL_AND_POWER.pdf
http://www.mightyram50.net/vbulletin/attachment.php?attachmentid=19066&stc=1
You can use a punch to get the locking nut loose, but that dings it up pretty bad.
Any questions, feel free to ask.