PDA

View Full Version : HELP I'm confused



Fordubishi
09-12-2011, 11:35 PM
Ok I'm putting the brake lines back on and can't find the bolts that hold the Addel clamps to the firewall.I thought they were the big head screws like the windshield access panel on the passengers side but those are to small. Checked the other bolts and screws and nothing fits, either to big, wrong thread or to small.

can someone take a pic of the passengers front brake like, clamp and screw so I can try and figure out what goes there.

Thank

camoit
09-13-2011, 01:26 PM
Will this help??
http://mightyram50.net/phpBB3/viewtopic.php?f=49&t=1184

Fordubishi
09-13-2011, 03:05 PM
Damn the brake section won't come up for me :shrug:

Fordubishi
09-13-2011, 05:22 PM
ok I got it working but no info on the firewall screws

pennyman1
09-13-2011, 05:50 PM
I will look tomorrow and get you the size of the screws from Geronimo

camoit
09-13-2011, 05:50 PM
I just looked at mine. It uses 6MM bolts and on the firewall is gold oversize head Phillips sheet screw that holds a clip.

pennyman1
09-13-2011, 05:53 PM
Thats 6 mm thread, not head size. Same as the fender bolts.

DroppedMitsu
09-13-2011, 06:29 PM
yup, 6mm thread 10mm head bolts.

Fordubishi
09-13-2011, 10:58 PM
Thanks guys, I'll check out my pile of bolts and screws tomorrow. I thought it was the large Phillips head gold screw, but they seem to be all to small. I'll look for bolt thread ones.

camoit
09-14-2011, 06:44 PM
I thought it was the large Phillips head gold screw, .

It uses boath .. I have the phillips on the firewall and the 6mm

Fordubishi
09-14-2011, 08:18 PM
Got it figured out. thanks everybody