PDA

View Full Version : Grant #3390 wheel hub and the mighty max



meandmit
03-10-2014, 07:51 PM
Well here's a dumb question. What do you use for the canceling ring as it's mounted to the old wheel, no place for 2 roll pins either? The hub doesn't have any offset either, Okay I see you pull the spring and ring (3 holes) out...I'm confused It's really a 2 part deal, I'll be using it with a Lecarra adapter (on order) to make my Lecarra wheel fit.

Merrill
03-10-2014, 09:08 PM
NRG Makes a hub that fits the MM and has the cancelling ring. It fits all common 6 bolt wheels as well. I have an account with NRG if you would like me to send you one.

meandmit
03-11-2014, 09:07 AM
I have an account with NRG if you would like me to send you one.

It depends on price as I'm into it 3 hubs already :(

Merrill
03-11-2014, 09:11 AM
Understandable. Retail is generally around 100 bucks. I can do 80 shipped.

meandmit
03-14-2014, 07:36 AM
Merrill, is that the short hub. Did the hub have the 2 roll pins for t/s switch cancel...I guess you wouldn't have a pix of the back side would you...see my problem is with the large diameter hub and flat spine area, the hub with hit plastic column cover before spines seat. My stock wheel has the offset spline area

DroppedMitsu
03-14-2014, 10:10 AM
Trim the plastic steering column cover, very easy to do. That's what us with the Eclipse steering wheels have had to done.

Merrill
03-14-2014, 10:12 AM
I will get a couple pics. Its a bolt-on with no trimming required.