PDA

View Full Version : Wheel Fitment



1949panrider
08-17-2013, 02:33 PM
Hello Everyone, I just would like to know if a set of factory 18" Nissan Titan wheels would fit on my stock 1988 Might max truck and will everything clear. Thanks

parrell456
08-17-2013, 04:11 PM
The center holes need to be opened up a little bit on the first gen trucks, but I haven't had a go at the second gen so I'm not sure. For what it's worth, I needed my 18" 5-spoke Titan wheel center holes bored out to be 94mm diameter by 10mm deep. My first gen truck has a 3" static drop and there are no fitment issues. I hope this helps some!

-RHP

1949panrider
08-18-2013, 08:45 AM
The center holes need to be opened up a little bit on the first gen trucks, but I haven't had a go at the second gen so I'm not sure. For what it's worth, I needed my 18" 5-spoke Titan wheel center holes bored out to be 94mm diameter by 10mm deep. My first gen truck has a 3" static drop and there are no fitment issues. I hope this helps some!

-RHP

parrell456, Thanks for the reply, I think I will buy this 18" wheels for my truck.