PDA

View Full Version : Electri cooling fan conversion



zzion
07-10-2012, 04:52 PM
I ned a electric cooling fan bad. I have the old clutch fan. I found aftermarket fans on ebay. How do I connect it? Where do I get a thermal switch to make it work?
Thanks zion

Fordubishi
07-10-2012, 05:47 PM
Just check out Summit racing

http://www.summitracing.com/search/Department/Cooling-Heating/Section/Fans/Part-Type/Fan-Switches-Thermal/Thermal-Switch-Style/Adjustable-fan-control-kit/?Ns=Rank|Asc
Fan controllers.

http://www.summitracing.com/search/Department/Cooling-Heating/Section/Fans/Part-Type/Fans-Electric/Fan-Diameter-in/14-000-in/?Ns=Rank|Asc
14" or better fan that moves 1500+ cfm

The negative gets grounded to the body and the positive gets hooked to the controller positive. just follow the instructions that come with the controller and its easy. the other way to do it is get a relay and hook it to an ignition positive , but doing it that way the fan is always on when the truck it turned on.

zzion
07-17-2012, 03:30 PM
I've found a relay switch that will screw into the block and switch the fan on.
Is there a place on the 2.6l block where it will screw in?
Thanks
zion

ram50rocket
09-11-2012, 11:38 PM
I got a 12" from autozone and bought a 3 way switch and fused it. Don't remember how I set it up though