[phpBB Debug] PHP Notice: in file /viewtopic.php on line 1052: date() [function.date]: It is not safe to rely on the system's timezone settings. You are *required* to use the date.timezone setting or the date_default_timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected 'America/New_York' for 'EDT/-4.0/DST' instead
[phpBB Debug] PHP Notice: in file /viewtopic.php on line 1052: getdate() [function.getdate]: It is not safe to rely on the system's timezone settings. You are *required* to use the date.timezone setting or the date_default_timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected 'America/New_York' for 'EDT/-4.0/DST' instead
[phpBB Debug] PHP Notice: in file /includes/functions.php on line 4505: Cannot modify header information - headers already sent by (output started at /includes/functions.php:3706)
[phpBB Debug] PHP Notice: in file /includes/functions.php on line 4507: Cannot modify header information - headers already sent by (output started at /includes/functions.php:3706)
[phpBB Debug] PHP Notice: in file /includes/functions.php on line 4508: Cannot modify header information - headers already sent by (output started at /includes/functions.php:3706)
[phpBB Debug] PHP Notice: in file /includes/functions.php on line 4509: Cannot modify header information - headers already sent by (output started at /includes/functions.php:3706)
mightyram50.net • View topic - powersteering gear box oil seal

mightyram50.net

A site for Mitsubishi Mighty Max and Dodge Ram 50 Enthusiasts.
http://www.mightyram50.net/phpBB3/

powersteering gear box oil seal

http://www.mightyram50.net/phpBB3/viewtopic.php?f=29&t=1666

Page 1 of 1

powersteering gear box oil seal

PostPosted: Wed Oct 20, 2010 4:35 pm
by djb1989
Looking for an oil seal for my 1989 power steering gear box the one next to the pitman arm any help?

Re: powersteering gear box oil seal

PostPosted: Sun Oct 24, 2010 5:25 am
by mikewarme
rockauto.com or go to dealer

Re: powersteering gear box oil seal

PostPosted: Tue Oct 26, 2010 11:58 am
by djb1989
mikewarme wrote:rockauto.com or go to dealer



Thanks dealer is not much help, but I will try rockauto.

Re: powersteering gear box oil seal

PostPosted: Tue Jan 04, 2011 10:35 am
by Boomer
NAPA has them if not they can order

Re: powersteering gear box oil seal

PostPosted: Tue Jan 04, 2011 8:50 pm
by mikewarme
djb1989 wrote:
mikewarme wrote:rockauto.com or go to dealer



Thanks dealer is not much help, but I will try rockauto.


Explain why dealer isn't any help? I just ordered seals from them for my gearbox.

Re: powersteering gear box oil seal

PostPosted: Thu Jan 06, 2011 6:06 pm
by sassafrass
i tried ordering one from NAPA and it was the wrong one. rock auto had the same part number. it is a metric seal. you can measure it with a caliper or take it down to a bearing shop. they can measure it for you. i ended up ordering mine online as the seal wasn't a stock one. it was about $2. i don't remember but i think it was 17x32mm or some such.

tom

Re: powersteering gear box oil seal

PostPosted: Fri Jan 07, 2011 12:09 pm
by mikewarme
The dealer is easiest
All times are UTC - 8 hours
Page 1 of 1
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/