[phpBB Debug] PHP Notice: in file /viewtopic.php on line 1052: date() [function.date]: It is not safe to rely on the system's timezone settings. You are *required* to use the date.timezone setting or the date_default_timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected 'America/New_York' for 'EDT/-4.0/DST' instead
[phpBB Debug] PHP Notice: in file /viewtopic.php on line 1052: getdate() [function.getdate]: It is not safe to rely on the system's timezone settings. You are *required* to use the date.timezone setting or the date_default_timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected 'America/New_York' for 'EDT/-4.0/DST' instead
[phpBB Debug] PHP Notice: in file /includes/functions.php on line 4505: Cannot modify header information - headers already sent by (output started at /includes/functions.php:3706)
[phpBB Debug] PHP Notice: in file /includes/functions.php on line 4507: Cannot modify header information - headers already sent by (output started at /includes/functions.php:3706)
[phpBB Debug] PHP Notice: in file /includes/functions.php on line 4508: Cannot modify header information - headers already sent by (output started at /includes/functions.php:3706)
[phpBB Debug] PHP Notice: in file /includes/functions.php on line 4509: Cannot modify header information - headers already sent by (output started at /includes/functions.php:3706)
mightyram50.net • View topic - 89 Power Ram 50 speaker sizes?
Page 1 of 1

89 Power Ram 50 speaker sizes?

PostPosted: Mon Dec 06, 2010 6:17 pm
by 89powerram
Can anyone tell me what size speakers are in my 89 Power Ram reg cab 4x4? I just bought it and the radio and speakers need replacing and was just wanting to know the sizes so I can purchase the speakers then do everything at once rather then take them out then go out and purchase then install new ones.

Thanks

Re: 89 Power Ram 50 speaker sizes?

PostPosted: Tue Dec 07, 2010 8:45 pm
by camoit
I want to say there 4 inch.

Re: 89 Power Ram 50 speaker sizes?

PostPosted: Tue Dec 07, 2010 9:36 pm
by DroppedMitsu
Yea, 4 inch but you will have to cut two of the mountig tabs to fit properly

Re: 89 Power Ram 50 speaker sizes?

PostPosted: Wed Dec 08, 2010 7:28 am
by 89powerram
4" in the dash and 4" behind the seat on the sides also?

Thanks

Re: 89 Power Ram 50 speaker sizes?

PostPosted: Wed Dec 08, 2010 9:22 am
by 89powerram
Also... to remove the stock radio.. Do I take out the four philips screws that are holding the plastic casing piece in then what... pull off the heater knobs and pull the whole plastic piece out? Or what is the proper way?? I dont want to try that and end up breaking something if thats not the way.

Also getting access to remove the dash speakers, do I just pry the covers off?

Thanks a bunch!

Re: 89 Power Ram 50 speaker sizes?

PostPosted: Wed Dec 08, 2010 8:06 pm
by camoit
yep pull the screws and all knobs. Just work it careful and look for things. There not to hard to remove. The cig. lighter has a plug on the back of it.

Re: 89 Power Ram 50 speaker sizes?

PostPosted: Wed Dec 08, 2010 11:04 pm
by 4doorciv
The vents are a little tricky. I came close to cracking the bezzel while taking mines out. Kinda gotta pry down a bit for the tabs to clear the vent.