locking hubs not locking

[TotallyBalistic]

you might have to do alittle fender trimming n such...theres a guy on here stuffin 35s i think but he cut his fenders

[supadupadennis]

im running 33s on my truck with a slight tbar crank,4cyl, about an inch maybe less. it just depends on the wear on your truck. Your profile says you have a v6, those sit a little taller than the 4bangers, you should have no problem running 33s with just a BL/no crank

[TotallyBalistic]

thanks dennis for that info i wasnt sure if he would have to cut fenders or not and i completely forgot he had a v6, so yeah carry on with the 33's dj youll be fine

[BCDieselD50]

im running 32's with 3' BL and cranked torsions, still need a lil height in the back so im gunna try makin a longer shackle. before i put on my ship anchor of a bump on i didnt rub too much, had to cut a little from the bottoms of the fenders , but now with the bumper i rub all the time.... time to say bye to IFS......

[Spicoli]

Shackles, the front shackles from a solid axle yoter are the ones you want.

Superwinch no longer makes manual hubs for are rigs, Rugged Ridge does, heres were I got mine http://www.baseline4x4.com/proddetail.asp?prod=15001.43 I like em more then my old superwinches switching between 2x4 and 4x4 seems alot more sure.

The guy on 35s trimmed his fenders, I have some 32s on my V6 but with some crazy offset wheels with only like 3in backspacing and I had to crank my tbars after a 3in BL. I got a spare set of fenders laying around, I'm gonna cut em and run atleast 35s, my news 4.625 rear LSD front will be welded diffs will be here soon and Ill be ready to get my V6 up and goin again.

EDIT:
O ya, your hubs probly wont unlock/lock b/c your C clip fell off. After some time you need to shim between your CV and C clip, my V6 has that problem, every once in a while I gotta go take off the outer hub and reset the C clip on there.

[DJ 4x4]

what exactly do you mean by shim the cv from the clip? Are you talking inside the hub and how would i go about doing this? I'm back home for x-mas break and have about a month of free time and this was on my list i dont really have the money to sink into the new hubs quite yet since i have this bad habit of putting all my money into my zr2 blazer (doing exhaust currently). My mother drives a mustang and id like to get my dodges 4x4 going so she can have something for when it snows. I'm such a nice son

[Spicoli]

No, theres a round shim that goes in between the C clip and were the hub pulls thru at.