[phpBB Debug] PHP Notice: in file /viewtopic.php on line 1052: date() [function.date]: It is not safe to rely on the system's timezone settings. You are *required* to use the date.timezone setting or the date_default_timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected 'America/New_York' for 'EDT/-4.0/DST' instead
[phpBB Debug] PHP Notice: in file /viewtopic.php on line 1052: getdate() [function.getdate]: It is not safe to rely on the system's timezone settings. You are *required* to use the date.timezone setting or the date_default_timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected 'America/New_York' for 'EDT/-4.0/DST' instead
[phpBB Debug] PHP Notice: in file /includes/functions.php on line 4505: Cannot modify header information - headers already sent by (output started at /includes/functions.php:3706)
[phpBB Debug] PHP Notice: in file /includes/functions.php on line 4507: Cannot modify header information - headers already sent by (output started at /includes/functions.php:3706)
[phpBB Debug] PHP Notice: in file /includes/functions.php on line 4508: Cannot modify header information - headers already sent by (output started at /includes/functions.php:3706)
[phpBB Debug] PHP Notice: in file /includes/functions.php on line 4509: Cannot modify header information - headers already sent by (output started at /includes/functions.php:3706)
mightyram50.net • View topic - broken cam bolt

mightyram50.net

A site for Mitsubishi Mighty Max and Dodge Ram 50 Enthusiasts.
http://www.mightyram50.net/phpBB3/

broken cam bolt

http://www.mightyram50.net/phpBB3/viewtopic.php?f=105&t=2056

Page 1 of 1

broken cam bolt

PostPosted: Wed Jan 19, 2011 5:48 pm
by 92slammedmitsu
hey guys heres the deal I was pulling 2.4 motor recently and a the engine hoist chain I had attached to a bolt on the engine was caught behind the cam gear and it broke the bolt out of the front of the camshaft. So my question is ...Can I use another cam and rocker arms from another head I have ? if so what would I have to do to make it work?

Re: broken cam bolt

PostPosted: Fri Jan 21, 2011 6:47 pm
by pennyman1
Have you tried taking a chisel and try to spin it out? The bolt should come right out as the torque on the bolt is only like 10lbs or so. A bolt for a 2.6 cam is the same.

Re: broken cam bolt

PostPosted: Sun Jan 23, 2011 3:59 pm
by 92slammedmitsu
Nevermind I found my answer thanks anyways
All times are UTC - 8 hours
Page 1 of 1
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/